sdynpy.fileio.sdynpy_psv.SensorHeadInfo

• Module: sdynpy.fileio.sdynpy_psv

• Source: GitHub

Signature¶

class sdynpy.fileio.sdynpy_psv.SensorHeadInfo(obj: 'Any') -> 'None'

Wrapper around COM sensor-head information.

Attributes¶

beam_gap¶

Beam gap, including units when provided by the COM interface.

bragg_cell_frequency¶

Bragg-cell frequency.

caps¶

Sensor-head capabilities as an IntFlag.

caps2¶

Extended sensor-head capabilities as an IntFlag.

caps2_set¶

Individual extended sensor-head capability flags that are set.

caps2_value¶

Extended sensor-head capabilities as a raw integer bitmask.

caps_set¶

Individual sensor-head capability flags that are set.

caps_value¶

Sensor-head capabilities as a raw integer bitmask.

coherence_optimizer_firmware_version¶

Firmware version of the coherence optimizer.

connected¶

Whether the sensor head is connected.

dimmer_max¶

Maximum laser-beam transmission.

dimmer_min¶

Minimum laser-beam transmission.

firmware_version¶

Sensor-head firmware version.

focus_far_limit¶

Farthest focus position.

focus_near_limit¶

Nearest focus position.

illumination_intensity_max¶

Maximum illumination intensity.

illumination_intensity_min¶

Minimum illumination intensity.

laser_delay¶

Laser delay in seconds.

laser_firmware_version¶

Laser firmware version string.

laser_power¶

Laser power in milliwatts.

laser_wavelength¶

Laser wavelength in nanometers.

lower_objective_threshold_temperature¶

Lower objective-threshold temperature.

max_rgb_led_color_index¶

Maximum RGB LED color index.

max_signal_balance¶

Upper end of the signal-balance range.

min_rgb_led_color_index¶

Minimum RGB LED color index.

min_signal_balance¶

Lower end of the signal-balance range.

name¶

Sensor-head name.

serial_number¶

Sensor-head serial number.

sonde_name¶

Sonde name.

standoff_dist¶

Stand-off distance, including units when provided by the COM interface.

system_laser_power¶

System laser power in milliwatts.

unique_id¶

Unique sensor-head identifier.

upper_objective_threshold_temperature¶

Upper objective-threshold temperature.

Methods¶

__init__¶

• Source: GitHub

def sdynpy.fileio.sdynpy_psv.SensorHeadInfo.__init__(self, obj: 'Any') -> 'None'

Initialize self. See help(type(self)) for accurate signature.

has_cap¶

• Source: GitHub

def sdynpy.fileio.sdynpy_psv.SensorHeadInfo.has_cap(self, cap: 'SensorHeadCaps') -> 'bool'

Return whether the sensor head supports the given capability flag(s).

has_cap2¶

• Source: GitHub

def sdynpy.fileio.sdynpy_psv.SensorHeadInfo.has_cap2(self, cap: 'SensorHeadCaps2') -> 'bool'

Return whether the sensor head supports the given extended capability flag(s).